DIN EN 3613-2009 航空航天系列.镀银NI-PH2601镍基合金(铬镍铁合金718)耐高温长螺纹减荷螺杆标准六角头螺栓.等级:1275MPa/650℃.德文和英文版本EN3613-2009
时间:2024-05-13 23:05:07 来源: 标准资料网 作者：标准资料网 阅读：9129
【英文标准名称】:Aerospaceseries-Bolts,normalhexagonalhead,relievedshank,longthread,inheatresistingnickelbasealloyNI-PH2601(Inconel718),silverplated-Classification:1275MPa/650°C;GermanandEnglishversionEN3613:2009
【原文标准名称】:航空航天系列.镀银NI-PH2601镍基合金(铬镍铁合金718)耐高温长螺纹减荷螺杆标准六角头螺栓.等级:1275MPa/650℃.德文和英文版本EN3613-2009
【标准号】:DINEN3613-2009
【标准状态】:现行
【国别】:德国
【发布日期】:2009-10
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:航空航天运输;航空运输;交货条件;名称与符号;尺寸规格;六角(边)形;六角头螺钉;高温;铬镍铁合金;锁定装置及定位装置;机械性能;多语种的;镍基合金;特性;减荷螺杆;螺钉(螺栓);镀银;航天运输;规范(验收);公差(测量);重量
【英文主题词】:Aerospacetransport;Airtransport;Deliveryconditions;Designations;Dimensions;Hexagon;Hexagonheadscrews;Hightemperature;Inconel;Lockingandlocatingdevices;Mechanicalproperties;Multilingual;Nickelbasealloys;Properties;Relievedshanks;Screws(bolts);Silver-coated;Spacetransport;Specification(approval);Tolerances(measurement);Weights
【摘要】:ThisstandardspecifiesthecharacteristicsofboltsnormalhexagonalheadwithrelievedshankandlongthreadinheatresistingnickelbasealloyNI-PH2601(Inconel718),foraerospaceapplications.Classification:1275MPa/650℃.
【中国标准分类号】:V20
【国际标准分类号】:49_030_20
【页数】:18P.;A4
【正文语种】:
【英文标准名称】:TestMethodsforMeasuringandCompensatingforReflectedTemperatureUsingInfraredImagingRadiometers
【原文标准名称】:用红外成像辐射仪测量和均衡反射温度的试验方法
【标准号】:ANSI/ASTME1862-1997
【标准状态】:作废
【国别】:美国
【发布日期】:1997
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:试验方法;辐射测量法;温度测量
【英文主题词】:radiometry;temperaturemeasurement;testmethods
【摘要】:
【中国标准分类号】:N11
【国际标准分类号】:17_200_10
【页数】:
【正文语种】:英语
Product Code:SAE AMS5519
Title:Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip.These products have been used typically for parts requiring moderate drawing or forming and high strength, but usage is not limited to such applications.Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.